XKeyscore, no way out

2016/08/27

https://en.wikipedia.org/wiki/XKeyscore?wprov=sfla1


debian install without any

2016/08/26

http://superuser.com/questions/907087/debian-unattended-installation

fai

debian’s preseeding?

kickstart

fai, 예전에 테스트했는데 개발사가 작성한 thumb drive에 내장된 스크립트에 밀렸다, 하하 (참고로 그 스크립트의 수준은 리눅스를 이해한 정도이다)
debian’s preseeding이라 이번에는 이걸 시도해 봐야지, 그런데 이제 보니 ubuntu를 설치해야 되는군, 헙, 뭐

kickstart는 redhat 계열에서 2000도 초반에.. 지금도 사용하겠죠.

좋은데 파티션에 대한 부담감이 나를 얼게 한다, freeze
건드리면 안되는 데이타 영역이라

OS 영역으로 잡히는 장치명도 조금은 다양한듯, 뭐 이건

나중에.. 나중에..


sysinternals를 up2date(최신 상태에서 사용)하기 using synctools

2016/08/26

https://kennykerr.ca/2013/01/04/synctools-for-sysinternals/

sysinternals를 최신 상태에서 사용하기 위해서

synctools를 사용하고 있습니다

이름은 up2date로 변경하여 사용하고 있다는, 하하

T:\SysinternalsSuite>dir up2date*
T 드라이브의 볼륨: 새 볼륨
볼륨 일련 번호: D4F1-9D64

T:\SysinternalsSuite 디렉터리

2016-04-07 오전 09:43 <SYMLINK> up2date.exe [SyncTools.exe]
1개 파일 0 바이트
0개 디렉터리 79,001,575,424 바이트 남음

T:\SysinternalsSuite>

한번 테스트해보면, 간만인가?

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\see>t:

T:\>cd SysinternalsSuite

T:\SysinternalsSuite>up2date
SyncTools for Sysinternals. Copyright (c) 2013 Kenny Kerr

45 files are up to date
89 updates to download

u accesschk.exe v6.2
u accesschk64.exe v6.2
u autoruns.chm
u autoruns.exe v13.62
u Autoruns64.exe v13.62
u autorunsc.exe v13.62
u autorunsc64.exe v13.62
u Clockres.exe v2.1
u Clockres64.exe v2.1
u Contig.exe v1.8
u Contig64.exe v1.8
u diskext.exe v1.2
u diskext64.exe v1.2
u du.exe v1.6
u du64.exe v1.6
u FindLinks.exe v1.1
u FindLinks64.exe v1.1
u handle.exe v4.1
u handle64.exe v4.1
u hex2dec.exe v1.1
u hex2dec64.exe v1.1
u junction.exe v1.7
u junction64.exe v1.7
u Listdlls.exe v3.20
u Listdlls64.exe v3.20
u LoadOrd.exe v1.1
u LoadOrd64.exe v1.1
u LoadOrdC.exe v1.1
u LoadOrdC64.exe v1.1
u logonsessions.exe v1.4
u logonsessions64.exe v1.4
u movefile.exe v1.2
u movefile64.exe v1.2
u notmyfault.exe v4
u notmyfault64.exe v4
u notmyfaultc.exe v4
u notmyfaultc64.exe v4
u ntfsinfo.exe v1.2
u ntfsinfo64.exe v1.2
u pendmoves.exe v1.3
u pendmoves64.exe v1.3
u pipelist.exe v1.2
u pipelist64.exe v1.2
u procdump.exe v8
u procdump64.exe v8
u procmon.chm
u Procmon.exe v3.30
u psexec.exe v2.20
u PsExec64.exe v2.20
u psfile.exe v1.3
u psfile64.exe v1.3
u psgetsid.exe v1.45
u PsGetsid64.exe v1.45
u Psinfo.exe v1.78
u PsInfo64.exe v1.78
u pskill.exe v1.16
u pskill64.exe v1.16
u pslist.exe v1.4
u pslist64.exe v1.4
u psloggedon.exe v1.35
u PsLoggedon64.exe v1.35
u pspasswd.exe v1.24
u pspasswd64.exe v1.24
u psping.exe v2.10
u psping64.exe v2.10
u psservice.exe v2.25
u PsService64.exe v2.25
u pssuspend.exe v1.7
u pssuspend64.exe v1.7
u RegDelNull.exe v1.11
u RegDelNull64.exe v1.11
u ru.exe v1.20
u ru64.exe v1.20
u sdelete.exe v2
u sdelete64.exe v2
u sigcheck.exe v2.53
u sigcheck64.exe v2.53
u streams.exe v1.60
u streams64.exe v1.60
u strings.exe v2.53
u strings64.exe v2.53
u sync.exe v2.2
u sync64.exe v2.2
u Sysmon.exe v4.11
u Sysmon64.exe v4.11
u Volumeid.exe v2.1
u Volumeid64.exe v2.1
u whois.exe v1.14
u whois64.exe v1.14

T:\SysinternalsSuite>


sysinternals를 최신으로 사용하기, part2

2016/08/26

https://live.sysinternals.com/

위 사이트를 열어서 필요한 툴을 받아서 바로 사용하면 됩니다, 쿨
저는 sysinternals가 받아져 있지 않은 시스템에서 procexp를 사용하기 위해서 종종 사용합니다.


MSYS2’s package installer pacman (from arch-linux)

2016/08/26

https://msys2.github.io/

msys2 vs cygwin

(msys2 pacman) vs (cygwin)

(vs (msys2 pacman) cygwin)

(diff (msys2 pacman) cygwin)

(diff (msys2 pacman) (cygwin apt-cyg setup.exe))

see@see-PC ~
$ lynx -source rawgit.com/transcode-open/apt-cyg/master/apt-cyg > apt-cyg

see@see-PC ~
$ install apt-cyg /bin

see@see-PC ~
$

see@see-PC ~
$ apt-cyg update
–2016-08-26 13:42:53– http://ftp.iij.ad.jp/pub/cygwin//x86/setup.bz2
Resolving ftp.iij.ad.jp (ftp.iij.ad.jp)… 202.232.140.70, 2001:240:bb8f::1:70
Connecting to ftp.iij.ad.jp (ftp.iij.ad.jp)|202.232.140.70|:80… connected.
HTTP request sent, awaiting response… 200 OK
Length: 2278354 (2.2M) [application/x-bzip2]
Saving to: ‘setup.bz2’

setup.bz2 100%[======================================================================================================================================================================================================>] 2.17M 140KB/s in 11s

2016-08-26 13:43:05 (211 KB/s) – ‘setup.bz2’ saved [2278354/2278354]

Updated setup.ini

see@see-PC ~
$

see@see-PC ~
$ wget
-bash: /usr/bin/wget: No such file or directory

see@see-PC ~
$ apt-cyg install wget
Installing wget
wget is not installed, using lynx as fallback
wget-1.18-1.tar.xz: 성공
Unpacking…
Package wget requires the following packages, installing:
cygwin libgcc1 libgnutls28 libiconv2 libidn11 libintl8 libnettle4 libpcre1 libpsl5 libuuid1 zlib0
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libgnutls28 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libidn11 is already installed, skipping
Package libintl8 is already installed, skipping
Package libnettle4 is already installed, skipping
Package libpcre1 is already installed, skipping
Installing libpsl5
wget is not installed, using lynx as fallback
libpsl5-0.13.0-2.tar.xz: 성공
Unpacking…
Package libpsl5 requires the following packages, installing:
cygwin libiconv2 libidn11 libunistring2
Package cygwin is already installed, skipping
Package libiconv2 is already installed, skipping
Package libidn11 is already installed, skipping
Installing libunistring2
wget is not installed, using lynx as fallback
libunistring2-0.9.6-1.tar.xz: 성공
Unpacking…
Package libunistring2 requires the following packages, installing:
cygwin libgcc1 libiconv2
Package cygwin is already installed, skipping
Package libgcc1 is already installed, skipping
Package libiconv2 is already installed, skipping
Package libuuid1 is already installed, skipping
Package zlib0 is already installed, skipping
Running /etc/postinstall/wget.sh
Package wget installed

see@see-PC ~
$ wget
wget: missing URL
Usage: wget [OPTION]… [URL]…

Try `wget –help’ for more options.

see@see-PC ~

OR using cygwin’s setup-x86.exe

T:\>setup-x86.exe -q -n -g -o -P nano

T:\>Starting cygwin install, version 2.874
User has backup/restore rights
Current Directory: T:\tmp
Could not open service McShield for query, start and stop. McAfee may not be ins
talled, or we don’t have access.
root: T:\cygwin system
Selected local directory: T:\tmp
net: Direct
site: http://ftp.iij.ad.jp/pub/cygwin/
Downloaded T:\tmp/http%3a%2f%2fftp.iij.ad.jp%2fpub%2fcygwin%2f/x86/release/nano/
nano-2.6.2-1.tar.xz
Extracting from file://T:\tmp/http%3a%2f%2fftp.iij.ad.jp%2fpub%2fcygwin%2f/x86/r
elease/nano/nano-2.6.2-1.tar.xz
Changing gid back to original
running: T:\cygwin\bin\dash.exe "/etc/postinstall/0p_000_autorebase.dash"
running: T:\cygwin\bin\dash.exe "/etc/postinstall/0p_update-info-dir.dash"
Changing gid to Administrators
Ending cygwin install

T:\>


MELPA

2016/08/26

https://melpa.org

과연 그대에게 무슨 일이 있는 것일까? 아니면 언제나 처럼 나에게

M-x list-packages

Opening TLS connection with ‘gnutls-cli –insecure -p 443 melpa.milkbox.net‘…

그리고 멍이다

(setq package-archives ‘(("gnu" . "http://elpa.gnu.org/packages/")
("melpa" . "http://melpa.milkbox.net/packages/")))

(setq package-archives ‘(("gnu" . "http://elpa.gnu.org/packages/")))

게 바꾸면 잘 된다

marmalade-repo.org 도 동일하다, 흠


Red Hat Enterprise Linux

2016/08/25

https://en.wikipedia.org/wiki/Red_Hat_Enterprise_Linux?wprov=sfla1


Follow

Get every new post delivered to your Inbox.